• 500 كيلوواط/ساعة - 1075 كيلوواط/ساعة نظام تخزين الطاقة في حاوية معيارية 20 قدمًا للاستخدام التجاري والصناعي Sunpal
  • 1 ميجاوات/ساعة من حلول التبريد بالسائل في حاوية واحدة للتطبيقات التجارية والمرافق الثقيلة Sunpal
  • 500 كيلوواط/ساعة - 1075 كيلوواط/ساعة نظام بطاريات LiFePO4 للبطاريات الكهربائية المتجددة والحاويات ذاتية التثبيت (ESS) بقدرة 500 كيلوواط/ساعة - 1075 كيلوواط/ساعة
  • 500 كيلوواط/ساعة - 1075 كيلوواط/ساعة نظام تخزين الطاقة في حاوية معيارية 20 قدمًا للاستخدام التجاري والصناعي Sunpal
  • 1 ميجاوات/ساعة من حلول التبريد بالسائل في حاوية واحدة للتطبيقات التجارية والمرافق الثقيلة Sunpal
  • 500 كيلوواط/ساعة - 1075 كيلوواط/ساعة نظام بطاريات LiFePO4 للبطاريات الكهربائية المتجددة والحاويات ذاتية التثبيت (ESS) بقدرة 500 كيلوواط/ساعة - 1075 كيلوواط/ساعة

500 كيلوواط/1075 كيلوواط/ساعة حاوية ESS 20 قدم للاستخدام التجاري والصناعي

    وحدة بطارية LiFeFePO4، منصة تفريغ مستقرة، أداء سلامة جيد، عمر دورة طويل;
    سعة 500-1075 كيلوواط/ساعة قابلة للتطوير مع تصميم معياري
    يدعم توفير الطاقة في أوقات الذروة والنسخ الاحتياطي والاستجابة للشبكة
    التحكم المستقل في الشحن/التفريغ لكل مجموعة بطاريات
    نظام الإدارة البيئية السحابية مع إنذارات في الوقت الحقيقي وتحديثات عن بُعد
    حاصلة على تصنيف IP65 للظروف الصناعية الخارجية القاسية في الهواء الطلق

شارك:

بيانات العاصمة

نوع الخليةمنشور LFP المنشوري
العلامة التجارية للخليةهيجي
دورة حياة الخلية>8,000 دورة عند 0.5 درجة مئوية، 25 درجة مئوية
مواصفات الخلية3.2 فولت 280 أمبير
تكوين السلسلة1P224S
عدد الأوتار5
سعة الطاقة المقدرة للسلسلة200 كيلو وات/ساعة
سعة الطاقة المقدرة للتيار المستمر1000 كيلو وات/ساعة
الجهد المقنن716.8V
 نطاق الجهد628 فولت ~ 806 فولت
واجهة اتصال نظام إدارة المبانيإيثرنت، كان، RS485
 بروتوكول اتصال نظام إدارة المبانيمودبوس RTU، مودبوس TCP

بيانات التيار المتردد

طاقة التيار المتردد المقدرة500 كيلوواط
الطاقة القصوى للتيار المتردد550 كيلو وات
جهد التيار المتردد المقدر400V
AC PF1 متقدم ~ 1 متخلف
الناتج THDi≤3%
تردد الشبكة الاسمي50/60 هرتز
طريقة العزلمحول 3 أطوار 4 خطوط محول 3 أطوار 4 خطوط

بيانات عامة

الأبعاد بدون خلوص (الطول*العرض*الارتفاع)6,058*2,438*2,591 مم
وزن النظام بأكمله<30 ميلي طن متري
درجة الحمايةIP65
نطاق درجة حرارة التشغيل-20~65℃
الرطوبة النسبية0 ~ 95% (بدون تكاثف)
أقصى ارتفاع للعمل3,000 متر/9,842 قدم
مفهوم تبريد فتحة التيار المستمرHAVC
مفهوم التبريد بفتحة PCSتبريد الهواء القسري
نظام إطفاء الحرائقمجموعة زجاجات HFC
واجهات الاتصالRS485، Ethernet، GPRS، RS485، Ethernet، GPRS
بروتوكولات الاتصالمودبوس RTU، مودبوس TCP

مقدمة

Q :

1. ما هو تصميم حاوية ESS هذه؟

A :

تُعد حاوية ESS مثالية للمستخدمين الصناعيين الذين يحتاجون إلى تخزين الطاقة الشمسية أو تخزين الطاقة الشمسية أو توفير الطاقة في أوقات الذروة أو النسخ الاحتياطي في حالات الطوارئ أو موازنة الأحمال على جانب الشبكة.

Q :

2. كيف يضمن نظام ضمان سلامة تشغيل الحاويات ESS؟

A :

يشتمل نظام ESS للحاوية على منطق تصنيف الأعطال، وحماية متقدمة لنظام إدارة المباني، وإخماد كامل للحريق للتخفيف من مخاطر البطارية.

Q :

3. هل تتوافق أنظمة دعم الطاقة في الحاويات مع عمليات الشبكة الذكية؟

A :

نعم، يدعم نظام ESS للحاويات الإرسال عن بُعد والتحكم النشط/التفاعلي في الطاقة والاتصال في الوقت الفعلي عبر نظام إدارة الطاقة المستند إلى السحابة.

Q :

4. كيف يتم تبريد وحماية نظام ESS للحاويات؟

A :

تشمل أنظمة التحكم في درجة حرارة الحاوية ESS أنظمة التحكم في درجة الحرارة، والحاويات المصنفة IP55، والمراقبة الديناميكية للبيئة من أجل الموثوقية الخارجية.

Q :

5. هل يمكن تحديث البرنامج الثابت والاستراتيجية عن بُعد؟

A :

نعم، يسمح نظام ESS للحاويات بتحديثات سحابية للبرامج الثابتة واستراتيجيات إدارة الطاقة لتقليل تكاليف التشغيل والصيانة.

Q :

6. How much energy can the lithium-ion battery in a 500 kWh battery energy system store?

A :

The system’s nameplate capacity is 500 kilowatt-hours (kWh), or 500,000 Wh, equivalent to ~1.8 × 10⁹ joules (1.8 GJ). In practice, the amount of usable energy will be lower due to depth-of-discharge limits, internal losses, and aging effects.

At 100% depth of discharge (theoretical), it could power a 0.5 kW (500 W) load for 1,000 hours or deliver 50 kW continuously for 10 hours.

But most systems operate with a safe DoD (e.g. 80 %) to preserve cycle life, so usable energy = 0.8 × 500 = 400 kWh in that case.

With round-trip efficiency of 90 %, the net deliverable may be ~360 kWh.

What is round-trip efficiency and how much energy is lost?

Round-trip efficiency is the ratio of energy output to energy input, accounting for all internal losses (resistive, thermal, conversion). Typical lithium-ion BESS systems achieve 85–95 % efficiency, so 5–15 % of energy is lost during a full charge–discharge cycle.

How many cycles / years will the battery last, and how does capacity degrade?

A well-designed lithium-ion BESS might be rated for 3,000 to 8,000 full cycles (depending on chemistry and operating conditions). Over time, internal degradation reduces capacity; for example, it may degrade ~2–3 % per year or per 1,000 cycles. The warranty often guarantees a minimum remaining capacity after a set number of years or cycles.

What power output (kW) can this system support, and how does that relate to duration?

The discharge power rating is independent of capacity. If the system supports e.g. 250 kW discharge, then for 500 kWh nameplate capacity, it could run at full power ~2 hours (500 ÷ 250). But if limited to 50 kW output, it could last 10 hours (500 ÷ 50). Always match power and duration specs to your application.

In what applications is 500 kWh a good fit?

A medium-sized commercial building to reduce peak demand charges

Backup power / ride-through during grid outages

Microgrid or campus-scale energy shifting

Coupled with renewables (solar/wind) for smoothing and peak shaving

If your critical load is 50 kW, a 500 kWh BESS gives ~10 hours of full backup (less when factoring safety margins).

Q :

7. Is 500kwh battery energy system good for an apartment?

A :

No, a 500 kWh battery capacity is excessive for residential use. The average apartment consumes only 20 to 60 kWh per day. A 500 kWh system is typically designed for commercial, industrial, or utility-scale applications.

Installing such a system in an apartment is impractical, due to limitations related to space, weight, and cost.

A capacity of 500 kWh is exceptionally high. Most residential batteries have individual capacities ranging from only 20 - 60 kWh. A 500 kWh capacity is typically designed for industrial, commercial, or utility-scale applications.

Space Requirements: These systems require large, well-ventilated areas, typically warehouses or dedicated rooms, rather than apartment units.

Energy Consumption: The average apartment consumes approximately 20-60 kWh per day. A 500 kWh system could theoretically power an apartment for 1-3 weeks, representing significant excess capacity.

Cost: Systems of this scale can cost about 4,5000 dollars, far exceeding the practical budget for residential use.

Technical Specifications

This system includes the following features:

Capacity: 500 kW power output, 250 kWh energy storage capacity

Design: Compact dual-container configuration for versatile deployment

Certification Standards: UL 1741 SA, UL 9540, CSA 22.2, UN 3536, UN 38.3, IEEE 1547

Deploying a 500 kWh battery system offers numerous advantages

Cost Reduction: Reduces energy bills by minimizing peak demand charges.

Energy Independence: Enhances power reliability by storing energy during off-peak hours.

Sustainability: Reduces the carbon footprint and supports green energy initiatives.

Scalability: Seamlessly integrates with existing renewable energy systems.

This system is suitable for the following applications

Commercial Buildings: Office towers, retail centers, and mixed-use developments.

Industrial Facilities: Manufacturing plants and warehousing centers.

Educational Institutions: K-12 schools and higher education campuses.

Remote Areas: Locations requiring off-grid power solutions.

Is a 500 kWh Battery Energy Storage System Right for Your Business?

A 500 kWh Battery Energy Storage System is ideal for businesses aiming to reduce energy costs, improve grid reliability, and accelerate ROI.

Sunpal’s system is designed for commercial and industrial clients with high energy demands. It integrates seamlessly with our PV modules (PERC, TOPCon, HJT) and supports both grid-connected and off-grid setups, enabling peak shaving, demand charge management, and backup power.

With Sunpal’s optimized design and vertically integrated manufacturing, clients often achieve payback in 4–6 years. Rising electricity prices and time-of-use tariffs further increase the financial benefits of storing solar energy off-peak and using it during peak hours.

With over 10 GW installed across 100+ countries and full global certifications, Sunpal delivers a reliable, future-proof energy asset that supports sustainability and boosts your bottom line.

Contact Sunpal today for a customized ROI analysis based on your facility’s load and local utility structure.

يمكنك الاتصال بنا مجاناً